Flip the frame over and nail one of these metal picture hangers on the back. So gorgeous I think Id love to do three in a row (one for each of my kiddos!) I made one of these a while back but I painted the wood gold and used white rope cordI never thought of using leather cord! Mine was 185". Kitchn is a source of inspiration for a happier, healthier life in your kitchen. Staples, E-6000 glue, or thumbtacks we tested all three of these, and they all work great for attaching your art to the trim. You will need to decide how many magnets you want to use, I chose 3, but 4 might have been better. These gold corner frames are my favorite so far. Sign up for all access to the Wonderland Subscriber's Library, Emails, & Updates. Can you change out the picture in this frame or would you have to make a whole new frame for a new picture? Take the stack of two magnets and glue it to the left side of the front, top stick. Author: Elsie Larson. The goal is to rip the 2x4s into long wood strips. And what a lovely way to display them. Thank you for the tutorial! [], [] Map: VintageLarge canvas art:Anewall DecorKids art frames:TargetDIY Poster Hanger tutorial hereStrong & Smart Pennants:Brim PaperyLetterboard:Letterfolk Co.Eye Chart PosterGlobes: []. You can use any kind of printer paper, but something a little thicker would be best. ), (Staple or thumbtack the leather cord to the moulding.) Continue to swap out photos and prints as often as you like. If you had to buy everything then it will be closer to ten bucks, not counting the pliers. Such a pretty pink! Really so much excited!!! xx She loves eating, cooking, and DIY projects. I compared the grommet kit and the eyelet kit at the craft store. Staining is easier on a smooth surface. Yours is super cute too, especially with the leather. Got a tip, kitchen tour, or other story our readers should see? Yes! It is nice. They are $4 wrapping papers I just used as posters instead! I love this project! I love it! You need to glue the twine on each of the top sticks. To use wax follow these steps: Since technically you're supposed to let the stain dry for at least 24 hours, you will have some rub off in this part of the process. Run all the pieces through. If you cant tell already, I really like art work and decor that is interchangeable. I have several pieces I want to do this to but I just dont want to put a hole in them as theyre not just prints but art Ive purchased ???? Hi Elsie, I was literally just thinking about doing something like this! My husband and I tried making these over the summer, but it was for two pieces to go side by side that were the exact same size, and they were just a hair off and it looked awful and we wound up throwing it all away it was so sad haha! Going to try this now! It is SO cute and great DIY instructions! But make sure to measure because your posters may be a different size than mine. Thank you for your kindness! Wow! The Dollar Tree calendars this year are absolutely adorable so Ive been turning them into budget friendly decor all week. Like it very much. Learn how your comment data is processed. I highly recommend this to anyone. I want to make one!! Ohhh you got me hooked, wood, leather, black & white photo perfect for my studio! Add your artwork or poster to the top and bottom rod by using either staples, thumb tacks, or E-6000 glue. Subtract your total length by your total length of posters. Measure out your poster or art you would like to hang, and cut your wood moulding accordingly. Thanks for posting. 2. Thanks for sharing this tutorial. This is such a fun and cute idea! Thanks Diana! Thank you for the idea and constant inspiration xoxox. I printed mine the largest I could1319on my PIXMA iP8720. Love this! http://bit.ly/2F1nuRY, [] way, I can change according to the month or according to each child. I love your candid lifestyle pic in the tutorial. Going to try and make my own from recycled fence pieces for a local dance studio. Such a neat idea and so versatile. I cant say enough about how well this printer handles black and white photosreally captures the contrast of the photo. She is currently on a journey to eat a more plant based diet, use more natural ingredients in the home, and get rid of everything that is cluttering the crap out of her house! These are beautiful! Your email address will not be published. Save the extra pieces for another project. You are so creative and talented. They can cut it to size at Home Depot but the hand saw will work just fine. This was super easy to follow DIY, and I absolutely LOVE the results! http://afashionstudentsdiary.blogspot.co.uk/. I have my poster readyy, need to get my woods strips to start working on this Ive seen some where they have magnets in the wood so you can change the picture. Tie a double knot (knot on top of another knot) so it won't slip through the hole. Thank you for the wonderful idea! These are my absolute favorite posters when it comes to vintage style posters. DISCLOSURE & PRIVACY POLICY | Birch on Trellis Framework by Mediavine, 4 yardsticks with one side that is plain (I found mine at Menards), twine, string, or ribbon to hang the frame. Gonna have to try it for myself! https://www.joann.com/diy-post-hanger/1479260P144.html. I can see three in a row painted in different pastel shades , Such a cute DIY project!! What a fun idea! It looks so nice, but is so easy! Thanks! This is stunning! Oh my gosh this is super cute. Read More, We Three Shanes is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com, 2022 We Three Shanes Sage Theme by Restored 316. I've got a ton of prints, posters, and more from various trips we've taken. You can consider buying a furring strip from Home Depot instead of the plant decor sticks. -wood stain and rags (Note, the glue in the photo is NOT what I wound up using. This is totally up my alley! Dabney is a Southern-born, New England-raised, current Midwesterner. You dont want them too close together or too far apart. Maybe it will help make a classy photo more more casual for everyday seeing? Then push your string through the hole in the back of the board. I put mine about " from the bottom of the piece of wood. | In Honor Of Design, The Boys' Room Tour! Or if you're doing 4 magnets, measure around 7" inset from either side. This isnt on my to do list but I also read that you could attach magnets inside so that you dont have to damage your art! Measure 11" (or center) and mark with a pencil. Hi! Do the same thing to the front bottom stick and then to the right sides as well. I love this project! Measure the total length of your wall. Where did you get yours? Hot glue was kind of hit or miss with strength. Such an amazing tutorial! Love them! Making lemonade out of ???? We hope our blog inspires you to do just that. =), I might make one for my cubicle at work. I'm not trying to protect the wood as much as I am protecting the wall from the stained wood. 5. The Dollar Tree magnets are quite strong so they have no problem holding the calendar pages. Just make sure the nails you use are small enough to go all the way through the frame. Measure 1" inset on either side of the front piece of wood. can you please let me know What types of paper you used here? Love love love this! To start you take " off each side to eliminate the rounded corners. Xo, Alex / http://www.sincerely-alex.com. If you opt to use that allow it to cure for 24 hours. Options: Pieces of Twine (You'll need one piece of twine for each poster). I hope I have inspired you to try. I made a similar one here: http://www.livingprettyblog.com/2016/02/a-simple-diy-framed-poster.html?m=1, This is an awesome idea, I still have two posters that need to be hanged and I am anxious to nail them right to the wall, so this is a great solution! For this step, you will need Furniture Wax or another type of top coat like Polycrylic, and a rag or brush. If you plan to use a different color, then you might need to paint the inside. These beautiful magnetic poster hangers are also great for seasonal decor. Required fields are marked *. Since I was doing 6 posters I needed 24 pieces of wood, two for the top stick and 2 for the bottom pieces of your hanger. There are always a couple of styles to choose from so just pick your favorite while making sure the sticks are longe enough. You can make them in any size andwood stain to fit your unique vibe. If youd like the frame to blend in with the artwork more, paint it the appropriate color with spray paint. Maybe with white wood and gold cord? The othe r is also adorable:). (Humidity might make a difference). Allow it to soak in for 5-10 minutes and then wipe off any excess with another rag. Your email address will not be published. Photography and Project Assistant: Laura Gummerman. Save my name, email, and website in this browser for the next time I comment. I promise its a super simple craft and will look great in any home! Thank you! Continue like this until you've cut as many pieces as you need. 8. xx- Elsie, Thank you!! Im sure they look cute in a planter with flowers but thats not what we are using it for today. Then I had to measure the distance between my ceiling and my chair rail and subtract the length of the poster which was 36". Love this! Though there are many ways to make your own wooden poster hanger today I'm going to show you how I made my DIY magnetic poster hanger from scrap wood. This isn't a complicated process. I am forever hunting forsimple, unique solutions for hanging large photos. Pair up your magnets so you're positive you are installing their opposite polarity, all positive on one stick and negative on the other stick. I then stapled them using this easy poster hanger DIY. Love the idea! We disclose all sponsored posts by both calling out the sponsor in the text of the post as well as tagging the post with our sponsored tag., First youll want to print your photo. xx- Elsie. Great ideas. Use three nails or screws to attach the two pieces of wood together from the back side, but make sure you are attaching them in a spot that will go through the poster as well so that the wood doesnt just fall off the bottom when you lift it up. Would love to see how you use this DIY in your own spaces! Very comfortable on the eyes and goes well with green plants! Step 4 Find the middle of your sticks so you can cut them in half. DIY Magnetic Poster Hangers would also be great for displaying kids art work. We have fun printables in our resource library that would work too. How cute are those?! Sign up for our newsletter and gain access to our huge resource library for FREE! You dont have to use the calendar pages if you dont want to. weird. Since my posters are 22" long, I measured 11" in from the 6.5" mark. I used hot glue and Super Glue Gel. Make sure your piece is on top of something so the drill won't gouge whatever you're using to hold your pieces when you drill. I had 4 pieces of 2x4 leftover from an old project that I chose to use. Line up your top piece over the bottom and push down firmly. Thank you! What a great idea! Let us know! This step requires the use of either an Orbital Sander with 120 Grit Sanding Discs or 120 Grit Sanding Block. My posters were 20" wide and I chose to do a 1" overhang on either end of the poster which meant I needed to cut lengths of wood 22" long. Mark off two holes on each end of the two wood strips. You need something really strong, like E6000, because those magnets are STRONG. To add the leather cord, measure how low you want it to hang, and cut the cord to reach each side of the wooden rods. I have a collection of small prints Ive been wanting to hang but I havent been able to figure out what I wanted to do. I like to use cut-up paper bags because I already have them. Kids can swap out art work all the time because the magnet frames are so easy to use. Eyelets. If you liked this craft then make sure to check out our other Dollar Tree calendar crafts happening all week. After having installed them I found several magnets came off and had to be reglued. I literally had the exact same experience when I bought one of these and my husband found out how much I paid, oops! We independently select these productsif you buy from one of our links, we may earn a commission. $3.50 a set! Then measured my 3" down and that was the place where I put my screw. Make a small mark with a pencil. Adhere all 3 or 4 magnets and let them dry. DIY magnet frames are so practical and can be used in so many ways. My photo makes it look like my point ends are hanging over the front sticks but they arent. Use whatever makes you happy (or whatever is on sale at the craft store). Such a great idea! Grab some pliers and pull. I wanted my frame to be the same width as the artwork in this case, 20 across. document.getElementById( "ak_js_1" ).setAttribute( "value", ( new Date() ).getTime() ); We want to help you simplify your life so you can enjoy it more.Weve got lots of tips that will help you make simple improvements to live a stress less life. Im so excited!!! Continue that process for all of your posters. If you're using hot glue adhere one magnet to the front piece at a time (otherwise the hot glue goes cold and won't stick). I have been wanting to try making these for a while now. Its a little bulky but you dont really notice that when its hanging up. I have that same plant in my house but it was a gift so Im not sure what it is. The set I chose was only held on by small pins and came off without much effort. What paper did you use!? Run all the pieces through. There are many kinds of things you can choose to hang on your walls using these DIY poster hangers. I am making a product for family picture. Thank you A Beautiful Mess! I followed these steps to hang my posters symmetrically down my hallway: And voila! And that picture is darling <3. Add another bar on the bottom of the artwork to ensure it hangs straight and doesnt flutter around. What a fabulous idea! Its simple, but makes such a bold statement all at once!